The SP-22X2 charging station is intended for simultaneous charging of 2 EVs with alternate current of 32 A and 22 kW (for 2 x sockets the parameters are: 64 A, 44 kW).
The charging station has a metal body for outdoor all-weather applications. Its contemporary design will perfectly match any architectural solutions in a modern city.
Multi-mode RGB light indication makes it convenient for users to obtain information about the current status of charging process. The system operation is intuitive and it offers a simple visual representation of charging process.
An integrated digital electricity meter enables prompt transmission of charging sessions data to a remote server with high accuracy.
OCPP 1.6J unified open communications protocol is used for SP-22Х2 control and monitoring which makes it possible to integrate this model into an existing network of charging stations in Russia. The SP-22-wall charging station can also be operated via a mobile app.
The charging station features not only an Ethernet interface, but also a built-in 3G/ 4G modem, which allows you to stay connected to the server without any need for additional cable lines.
The time required for EVs to be completely charged depends on the capacity of their batteries. It takes 2-5 hours for SP-22X2 to have standard EVs completely charged.
The design of SP-22X2 charging station makes it suitable for operation in different climatic conditions, the charger is equipped with a temperature and humidity control system to maintain the best operating temperature inside the charger body and to prevent condensation.
An additional module integrated in the SP-22-wall body serves for protection against lightning and overvoltage, the station is also equipped with modules for protection against short circuit, overload, overvoltage and overheating.
An integrated SP-22X2 controller locks the charging plug of the device depending on the charging status, it also provides for the emergency unlocking in case of a power failure. A current leakage protection device (with a control system) is installed in the plug connector on the infrastructure side.